Top 10 Best Toy Box Lid Support – (Guide And Comparison)

Top 10 Best Toy Box Lid Support – (Guide And Comparison)

Are you searching for the best toy box lid support? Confused with too many options? If that is your situation, you have come to the right place. This is your ultimate guide to buying the toy box lid support.

We understand how much of a hassle it can be to go through thousands of reviews when you have too many options. So, leave all your worries, check out this ultimate guide, and make a hassle-free purchase decision.

10 Best toy box lid support Reviews in 2022

1. Toy Box Hinges Soft Close – Lid Support Hinges Heavy Duty,Soft Close Hinges for Chest Toy Box,Lid Stay Support 50lb/2pcs (APFFSY)

Features :

  • KEEP LID STAY OPEN — The lid support hinge holds the lid open until you want to close. Similar purpose of a gas strut but doesn’t self lift, stays and supports lid where you want it. It’s widely usage as hinges for wooden box, such as toy box hinges,chest hinges, also fit for overhead kitchen cupboard,wardrobe lids too.Perfect for any lids or flaps when soft close lid support is required.
  • DURABLE MATERIAL — Heavy lid hinge, max weight support 50lbs/2pcs.The up-grated version has the advantages of strong bearing capacity,metal connector instead of plastic clip.Made of premium quality zinc alloy with maximum corrosion resistance and durability the chest slow close hinges guarantee high performance.
  • EASY TO INSTALL【 Important:Refer to our install videos ! 】 — The lid closer can be mounted on the left or right side,also used for side-mounting and top-mounting.Upward door open adjustable angle of 75°,90°,110°.It can fit for most lids and allow you to keep your lids stay at any angle.Just mark two drilling holes, and screw each mounting bracket. No need to use the diagram on the package!
  • ADJUSTABLE TENSION — Adjust the toy box hinges soft close tension with Allen wrench to fit for lids with different weight.After installing the lid hinges for wooden box, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure,prevent lid from slamming shut.
  • CONDITIONED SOFT CLOSING — Only with this chest hinges supporting less than 50lbs and keeping two lid support soft close in same tension by your adjustment will soft closing function work perfectly!! The safety hinges will go down slowly,and prevent fingers from getting smashed.

Additional Info :

Color Silver
Item Dimensions
Height 0.65
Width 1.8
Length 5.2

2. SafeStay Lid Stay 105 Degree Open with Soft Close, Easy to Install, Lid Support for Toy Box and Chest

Features :

  • GENTLE SLOW CLOSE DESIGN – Lids will lower slowly and gently to avoid crushing even the smallest of fingers.
  • HOLDS LID OPEN – Never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close.
  • SMALL COMPACT DESIGN – The compact design allows for installation in tight fit areas. The lid stay allows the lid to open at a maximum 105 degree angle.
  • EASY INSTALL INSTRUCTIONS – Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
  • 100% MONEY-BACK GUARANTEE – If for whatever reason you are unhappy with the product we will refund you, no questions asked!

Additional Info :

Color Gray
Item Dimensions
Height 0.5
Width 3.1
Length 4.5

3. Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 2)

Features :

  • STURDY LID STAY WITH SOFT CLOSE 🌟 Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch.
  • EASY TO INSTALL 🌟 Comes with an exclusive original design installation card, only takes 5 minutes to complete the installation by following the install placement measurement card and installation video.
  • 2-WAY INSTALLATION 🌟 MORINBO hinges can be installed on Top opening or Upward opening lids. They can support lid weight from 5lbs to 10lbs and lower gently; Weight support will be doubled by using 2 lid supports (6lbs-20lbs)
  • COMPACT DESIGN OF LID STAY HINGE 🌟 The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
  • KNOW BEFORE PURCHASING 🌟 Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Each lid hinge can be used for right or left hand mounting.

Additional Info :

Color Gray
Item Dimensions
Height 0.39
Width 2.2
Length 9.2

4. Lid Stay Hinge Soft Close Safety Lid Support Toy Box Hinge 25-50lb for Toy Box Kitchen Cabinet Wardrobe of Top-Upward Opening & Top Flap Doors

Features :

  • LID STAY HINGE ROTATE ONE WAY TO LOCK LID OPEN- Soft close hinges will keep your lid open until you push hinge down. Keep the lid stay in place at different angles when the opening angle is larger than 90°. Lid support hinge is suitable for doors of cabinet, toy box, kitchen, wardrobe, storage chest cupboard and so on.
  • SOFT CLOSE SAFETY HINGE — Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid will slow the descent when the opening angle is less than 70°.
  • WEIGHT CAPACITY– 25-50lb Lid support hold 12lbs-22lbs/1pc. 2 hinges support 25-50lbs.
  • DURABLE HEAVY DUTY HINGE–Lid Support Hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. corrosion resistance and anti-rust durable and practical.
  • EASY TO INSTALL ONLY 5 MINUTE–Each lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements of the instructions.

Additional Info :

Color Silver

5. RUYUFE Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install

Features :

  • STURDY LID STAY WITH SOFT CLOSE– The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
  • LID STAY SLOW CLOSING — Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
  • KEEP LID HINGE STAY OPENING, WIDE USAGE — Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
  • COMPACT DESIGN OF LID STAY HINGE — The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
  • EASY TO INSTALL LID SUPPORT– Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.

Additional Info :

Color Gray

6. RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs

Features :

  • DURABLE LID SUPPORT HINGE–Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support or bar counter function.
  • SOFT CLOSE LID STAY—Every Lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting
  • MAX WEIGHT LID HINGE–Support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
  • WIDE APPLICATION–Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe.
  • EASY TO INSTALL LID SUPPORT –The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package.

Additional Info :

Color Silver
Item Dimensions
Height 0.15
Width 1
Length 8

7. Morinbo Toy Box Hinges Soft Close Lid Stay 90 Degree Open, Lid Support for Upward Opening and Top Opening Flap Doors Weight Capacity Range from 9 lbs to 16 lbs/1pc (Pack of 1)

Features :

  • STURDY LID STAY WITH SOFT CLOSE 🌟 Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 9-16 lbs, Height 18-19 inch.
  • EASY TO INSTALL 🌟 Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation.
  • LID STAY SLOW CLOSING 🌟 Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
  • COMPACT DESIGN OF LID STAY HINGE 🌟 The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 90 degree.
  • KEEP LID HINGE STAY OPENING & WIDE USAGE 🌟 Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.

Additional Info :

Item Dimensions
Height 0.8
Width 3.5
Length 11

8. Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2

Features :

  • LID STAY SLOW CLOSING – Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
  • CONDITIONS OF USE – Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs)
  • COMPACT DESIGN OF LID STAY HINGE – The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees
  • 2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting.
  • ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video.
  • WIDE USAGE — Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges

Additional Info :

9. National Hardware N208-686 V1893C Center Spring Lid Support in Antique Brass

Features :

  • Used to support lids on boxes, chests, etc
  • Spring loaded supports are available for left, right or center mount
  • Mounting screws included
  • Manufactured from steel

Additional Info :

Color Antique Brass
Item Dimensions
Height 0.9
Width 3.7
Length 7.6
Weight 0.30999999974004

10. Gas Struts Lid Support for Heavy Lid,Toy Box Hinges Soft Close,Heavy Duty Wooden Box Covers & Cabinets & Storage Chest (200N/45Lb 2 Pack)

Features :

  • 【Easily open heavy lids】200N/45Lb 2-Piece Heavy Duty Gas Prop can support lids up to 60 lbs and easily open heavy duty lids.
  • 【Safe and reliable】The lid support will descend slowly without closing violently. Soft closing hinge prevents fingers from breaking and no noise will make you feel uneasy.
  • 【Widely used】Box lid support hinge is designed to support heavy box lids, such as toy boxes, stool lids, blanket boxes.
  • 【Easy Installation】Simple installation instructions ensure perfect installation the first time! The lid fixture can be installed on the left or right side. Chest hinge allows the lid to open at an adjustable opening angle of 75°-105°.
  • 【WARM TIPS】Gas struts will not applicable with the lid at width more than 50” and height over 25”. And must with a 9 inch clearance. Hinges will not work if your lid doesn’t match specified dimension and weight requirement

Additional Info :

Factors You Should Consider Before Buying the toy box lid support

As you already know, research is essential before making any purchase. So, there are some factors you should consider before starting your research. This is important so that you can make your entire buying process as hassle-free as possible.

Remember, your time has as much value as your money. So, there are a few things you should determine which will affect your research as well.

There are a few questions you should ask yourself to determine your course of research on the toy box lid support:

  • Is this toy box lid support serving the purpose of purchase? What are your expectations from the product?
  • What functions must the toy box lid support have? Are there any specific functions that you are seeking in the product?
  • Is there a specific budget, or is the budget flexible?
  • Will the toy box lid support require maintenance and upkeep costs?
  • Are you looking to buy the toy box lid support online or offline? What will be the best places to purchase the product?
  • Where will you seek reliable information on the toy box lid support?

Having multiple options from various brands can get confusing, so ask yourself these questions to narrow down your research.

Once you determine your expectations from the toy box lid support and your price range, you decide which ones you must research. The research will help you determine the pros and cons. But before that, where will you get the reliable information to conduct your research?

Sources for Research

It’s 2022, and your best sources for information and research can be found online. Any toy box lid support and you will find the best selling online marketplaces available. Visit any or each of them to learn about the specifications and prices given on your toy box lid support.

You will be able to find the best deals out of all the options. You can also watch some YouTube videos on the product to see for yourself the functionality of the toy box lid support.

Advantages of Buying Products from Online Sites

Online sites provide a variety of benefits that make your selection and buying process easier. Here are some of the advantages of buying products from online sites:

Best Prices

Reliable online sites give you the benefit of comparing prices and finding the best deals. Platforms like Online.com work with manufacturers directly to provide better deals. And the coupons and occasional discounts add to it.

There are no intermediaries in between to make the buying process easy. And the best part? No trouble of going to the shop.

Reliability

Renowned online sites like Newegg, Online, Walmart have branches all over the country. Their transaction and delivery policies are reliable compared to other e-commerce platforms.

Huge Selection

More Variety – the best part about online shopping platforms. These sites give you access to a vast variety of options to choose from.

Suppose you go to online.com. Search toy box lid support and up comes options of the product in different prices, brands, and specs. You get to browse these options from the comfort of your home and save time.

You can choose the one that fits your need from your preferred seller. Yes, online platforms even give you the option to choose your seller.

Credibility

These online sites have numerous customer reviews of the products shown. So, you know which product is authentic and which seller is authorized. And for these facilities provided, they are trustworthy and credible.

Other additional benefits of shopping from online sites would be the facility of easy return and record of the purchase. Online sites are constantly making changes to make shopping easy and hassle-free from the comfort of our homes.

How to Select the toy box lid support

Making your final decision can pose to be a challenge. But worry not. We have a few suggestions to make your selection process easier.

Before that, we would recommend you opt for sites like Online, Walmart, Newegg, and Best Buy for your purchase.

So the factors you should consider while selecting your toy box lid support would be:

Price

Hop on to any of these sites and search the options you have shortlisted. Then compare the prices and look for discounts. Don’t forget to factor in shipping charges as well.

Once you get the best favorable deal, you can opt for the toy box lid supportto match your need.

Brand

Price and brand are somewhat interrelated. Usually, high-end brands charge more. But higher price does not mean a better choice.

So, opt for the brand that meets your need the best.

Function

Factor in the functionality of the product as it is very crucial. Check if the specs meet your need. Consider buying the one that will last in the longer run.

Understand the toy box lid support specs and functionality to determine its use for you.

Customer Reviews

As we mentioned before, online sites usually have a review section. This section is filled with customer feedbacks and even pictures of the product.

Browsing through these reviews is the smartest thing to do. These reviews allow you to comprehend how the product will work for you. You can even determine the pros and cons of these reviews.

Check the rating on the website to learn if the seller is delivering the toy box lid support as expected by the other buyers.

Final Words

All these factors will contribute to choosing your best toy box lid support that meets your expectations. So, use your time efficiently.

And that is all for the ultimate guide to buying the toy box lid support. We hope you can make your purchase confidently. Happy Shopping!

Leave a Comment

Your email address will not be published.

Scroll to Top