Our 10 Best 3d Printer Thermistor Reviews In 2022

Our 10 Best 3d Printer Thermistor Reviews In 2022

Have you been searching for the best 3d printer thermistor for your needs? You are at the right place. We recognize that amidst so many choices in the market, it can be perplexing and confusing to make the right pick.

This article will help you choose the right 3d printer thermistor with more ease. We have taken into consideration the varied needs and wants of all segments of consumers to give you the perfect guide on how to pick the right product. So that you can shop worry-free!

Our Top 10 Best 3d printer thermistor On The Market

1. Creality 3D Printer NTC Thermistor Temp Sensor 100K for Creality Ender 3/Ender 3 Pro/Ender 5/CR-10/CR-10S/CR-X (1m/39.4inch)

Features :

  • Use for heated bed or extruder.Package include: 5 thermistors.
  • NOTE: Not Fit for CR-10S Pro V2/Ender 3 MAX/CR-10s Pro/Prusa i3 3D Printer. Please confirm whether this thermistor is compatible with your 3D Printer Before buying.
  • Wire length: 1m/39.4 inches.
  • It has 2 pins female connector.
  • Temperature sensor 100KΩ accuracy of ± 1%.

Additional Info :

2. WINSINN HT-NTC100K Thermistor Sensor, Ender 3 v2 Upgrade 3×15 3950 XH2.54 2Pin, Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend (Pack of 5Pcs)

Features :

  • ✔️Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm
  • ✔️The temperature measurement: -50 °C ~ +350 °C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature filament.
  • ✔️Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
  • ✔️HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers’ convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
  • ✔️Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).

Additional Info :

Color HT-NTC100K

3. 3D Printer NTC Thermistor, 6-Pack 3950 100K Ohm Thermistor Temp Sensor Replacement for Creality Ender 3 5 Pro CR6 CR10S Series 3D Printer Hotend, Wiring 1m/39.4inches 2Pin XH2.54

Features :

  • 【Product Function】3D printer thermistor can be used for the heating bed or extruder hotend, which can accurately monitor temperature changes, avoid excessive temperature fluctuations affecting the printing effect, and ensure the safety of 3D printing work
  • 【Compatible Model】NTC 3950 100K thermistor cable is 1 meter/39.4 inches long, the connector is 2pin XH2.54, compatible with most 3D printers in the market, such as Creality ender3, 3X, 3 pro, ender3 V2, ender5, ender5 Pro , Creative CR6, CR10, 10S, Pro, etc
  • 【Temperature Check】NTC100K thermistor can measure the temperature change from -40℃ to +300℃, Temperature sensor 100KΩ accuracy ± 1%, Recommended parameters: R25℃=100K B25/50=3950K± 1%
  • 【Package Included】3D printer thermistor kit contains 6 1m NTC100K thermistors. For the convenience of customers, the wires are connected by wire, and customers can cut and weld according to their needs
  • 【After-sale Service】We provide product warranty or return and exchange service. If the product you receive is missing or there is a problem during the installation process, please contact us in time, and we will give you a satisfactory answer. Happy shopping

Additional Info :

Color NTC100K

4. 3D Printer Thermistor HT-NTC 3950 100K, 6-Pack Temp Sensor Compatible with Creality Ender 3, Ender 3 Pro, Ender 5, CR-10, CR-10S 3D Printer Hotend, Wiring 1m/39.4inches 2Pin XH2.54

Features :

  • 【Product Use】Thermistors are installed in the heating bed of 3D printers and extruders to solve the problem of excessive temperature fluctuations affecting print quality, Ensuring the safety and efficiency of printer operations, can be used with heating blocks to support thermocouples, suitable for printing high-temperature filaments
  • 【Temperature Measurement】HT-NTC100K 3950 is able to measure the temperature change from -50℃ to +350℃, Can replace the original K-type thermocouple temperature, Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%
  • 【Product Size】HT-NTC100K thermistor wire length 1 meter / 39.4 inches, the connector is 2pin XH2.54, temperature measurement round head using 304 stainless steel, diameter 3mm, length 15mm, with internal temperature package, to ensure maximum service life with accurate temperature measurement
  • 【Compatible models】The 3D thermistor temperature sensor is compatible with most 3D printers in the market such as ender3, 3X, 3 pro, ender3 V2, Creality CR-10S Pro, Anet E10 etc
  • 【Package Includes】6PCS HT-NTC100K 3D printer thermistors for the convenience of customers, the wires are connected by wire, customers can cut and solder according to their needs

Additional Info :

5. HICTOP 100K ohm NTC 3950 100k thermistor 1.2m/Temp Sensor for Reprap Creality Ender 3, Ender 3 Pro, CR-10 10S 3D Printer 2Pin XH2.54 (Pack of 5)

Features :

  • HICTOP 3d printer 100k thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers
  • The thermisor is compatible with most 3D printers in the market such as ender3, ender3 pro, ender3 V2, CR-10, hictop d3 hero etc
  • There is a 2 pin female connector on the thermistor for 3D printer
  • Wire length for the thermistor: 1.2m/47.2 inches.
  • Recommended parameters for the thermistor: R25℃=100K B25/50=3950K± 1%

Additional Info :

6. Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend (100K 3950)

Features :

  • M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span
  • DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor
  • Package: 1piece m3 screw in thermistor
  • Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300°C for hotend “Simple ONE ” &”Hotend “All In ONE” #define TEMP_SENSOR_0 13
  • For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use

Additional Info :

7. 1piece 3D Printer 500℃ Thermistor T-D500 M3x15mm Cylindrical High Temperature Sensor 500℃ K500 Thermocouple Sensor Compatible with Volcano V6 Hotend PEI PEEK Nylon Carbon Fiber Printing

Features :

  • Package: 1piece T-D500 Thermistor cartridge with about 1 meter long cable
  • Durable, Flexible and Long Lasting; 450℃ long hours guaranteed
  • Compatible with PT100 V6 hotend block, Prusa i3 printer and This Thermocouple sensor is 3mm x 15mm cylindrical package for compatibility with all cartridge-style heater blocks.

8. Genuine E3D Hotend Thermistor Cartridge Replacement

Features :

  • Direct replacement of cartridge type thermistor in E3D hotends.
  • A custom made thermistor encapsulated into an easy to use cartridge package.
  • Genuine Semitec 104GT thermistors used.
  • Comes with (1) Hotend Thermistor with attached connector and (1) connector cable measuring 40 inches (101cm)

Additional Info :

Item Dimensions
Height 0.5
Width 2
Length 3

9. 2pcs Sprite Extruder Pro Temperature Sensor High Temperature Pro Thermistor 300℃ OD 3mm Compatible with Creality Ender3 S1 Pro, CR10 Smart Pro, Sermoon V1 Pro 3D Printer (300C Thermistor)

Features :

  • Thermistor rod size: 3×5.5mm, apply imported chip, NTC100K B3950, installed with XH1.25 connector, upgraded, can sensor up to 300℃ for long time working.
  • This is designed for Sprite Extruder Pro High temperature kit 300C, Compatible with FDM 3D printer equipped with sprite extruder like Ender 3 S1, Ender 3 S1 pro, CR10 Smart pro, Sermoon V1, Sermoon V1 Pro 3D Printer
  • The probe of this thermistor tube is made of closed stainless steel sleeve, with strict package and much higher quality than the common cartridge NTC 100K thermistor on the market.
  • Package: 2pcs thermistors
  • If you use it for other 3D Printers, please must check the connector and length, this connector is very small, designed specially., please must know before ordering.

Additional Info :

Item Dimensions
Weight 0.0440924524

10. [Gulfcoast Robotics] HEX EPCOS Thermistor Upgrade for Creality Ender 3 Ender 5 CR10 3D Printers 1 Meter Extension Cable

Features :

  • EPCOS Thermistors are the ideal choice for the official Creality firmware. Provides more accurate temperature readings than traditional 100K NTC3950 Bead Thermistors.
  • Creality 1M extension cable includes a 2-pin JST-XH connector that mates perfectly with the board.
  • Fiberglass insulated leads and brass hex stud provide safe usage at high temperatures up to 300° Celsius.
  • M3x0.5 HEX stud threads in to the heater block for quick, secure installation.
  • Silicone insulation ring shields the brass stud from external airflow (e.g. ceiling fans) for stable temperature readings.

Additional Info :

Item Dimensions
Height 0.27559
Width 0.27559
Length 2.3622

The Buying Guide: Our Advice on How to Buy the Best 3d printer thermistor

Before you invest your hard-earned money into a product, you should properly educate yourself about the available products and the best alternatives in the market. We have compiled the list of factors you should consider before buying a  3d printer thermistor to make your task easier.

Like almost any product, before buying a 3d printer thermistor, you should ask yourself these few questions:

  1. How reputable are 3d printer thermistor in comparison to market competitors?
  2. How durable and long-lasting are they, and how easy is it to service or fix them if something goes wrong?
  3. Why is it worth buying 3d printer thermistor instead of other products?
  4. What are some key features and highlights of 3d printer thermistor? Are those features worth it for your needs?
  5. What are some positives and negatives of 3d printer thermistor, and how do they affect your user experience?
  6. Where can you buy 3d printer thermistor and service or repair it if necessary?

These are just some of the questions that you need to seek the answer to when purchasing the product. It is essential to keep in mind that you may have further queries and questions, as you should.

These are just a few considerations that we consider absolutely crucial. You can find detailed answers to almost all of your questions by some internet research or even by trying out the product at the store.

Summarized Tips on Why You Should Buy from an Online Marketplace

In the year 2022, you have a multitude of options every time you look to buy a new product. You have traditional retailers, department stores, online marketplaces, etc. We believe that for your next purchase, you should seriously consider online marketplaces.

Online platforms come with loads of facilities designed to make your entire shopping experience better. They are reputable, well regarded, and provide you with the opportunity to shop from your home and get the best deals.

A very important thing you get when buying from an online platform is flexibility and convenience. In our busy lives, it is quite hard to find the time to visit a physical store. Meanwhile, you can buy anything you want, including 3d printer thermistor from an online store, while you are taking a break at work or doing your chores.

As it should be clear to you by now, there are a multitude of benefits when you go with an online platform over physical stores. Some of the benefits are summarized below in a few key points:

GREAT DEALS

Online platforms quite often offer the best value in the market. There are many sellers who sell 3d printer thermistor. However, thanks to the wide dealer and supplier network as well as advanced supply chain management, online platforms can almost always undercut the competing physical stores.

Online platforms also often give discounts and sales, especially around the Black Friday event and other festivities. You can find deals that you simply can’t find anywhere else.

ROCK-SOLID RELIABILITY

Reliability is one key concern when you buy from an online retailer without physically testing the product. You simply don’t have the option to check the product before buying, so you must rely on the site.

Thankfully, online platforms usually offer warranty and easy replacement on many brands and products, including 3d printer thermistor. You can avail all the warranty facilities of any regular store, all from the comfort of your own home.

Their extended warranty policies make sure that if you do end up encountering an issue on any product, you won’t incur financial losses. In fact, you can get a replacement product in a short period. This sort of guarantee makes shopping from online platforms a breeze. This is a primary reason so many people are switching to shopping from online platforms.

HUGE VARIETY AND SELECTION

The online platforms around the world are growing exponentially in size, and that applies to the selection of products as well. As they get more popular, more and more brands sign up to sell their products on online platforms.

They have a wide range of products across many categories, divided and organized well. This helps you find exactly what you are looking for easily. You may even get software-generated recommendations for products you may need.  This includes 3d printer thermistor and many more.

Having a huge variety means that you can assess your preferences and choices. You can choose from a range of alternatives before purchasing. This is often not the case in most physical stores, where there is a limitation to the number of brands.

USER GENERATED REVIEWS

Being able to read reviews from actual users of the product could prove to be very useful. Companies may often leave out some potential flaws or negatives in the product description.

But users who actually used the product can give honest and balanced feedback, which is useful to the buyers. You can take a decision unaffected by bias if you account for actual user experiences of the product you are looking for.

Lastly…

Being on the lookout for the right product can be challenging as there are so many good options. It can often be hard to narrow down the best products. Hopefully, this buying guide will help you pick from the best 3d printer thermistor for your unique needs.

Another important aspect is picking the right place to buy the right product. We have extensively covered the benefits of going with online platforms. We hope that this article will be informative enough in aiding you to make the best purchase decisions in the future.

Leave a Comment

Your email address will not be published.

Scroll to Top